- Access by Xinjiang University
Effect of the Rayleigh-Taylor instability on maximum reachable temperatures in laser-induced bubbles
Phys. Rev. E 86, 027301 – Published 15 August, 2012
DOI: https://doi.org/10.1103/PhysRevE.86.027301
Abstract
Laser-induced bubbles provide an effective vehicle to achieve high-energy concentrations and maximum temperatures in bubble luminescence phenomena. One limitation to the temperatures that can be achieved is the development of the Rayleigh-Taylor instability (RTI) during the instants previous to the bubble maximum compression. For a given fluid, the control parameters of the experiment are: the bubble maximum radius, the bubble ambient radius, the initial perturbations of the bubble, and the liquid pressure at infinity. In this work, experiments using laser-induced bubbles in a highly viscous phosphoric acid were performed in order to determine the achievable parameters values in the phase space. The effect of , , , , and on the maximum temperature achieved by the gas contents inside the bubble were numerically determined. The results show for each static pressure an optimum region for maximum temperatures of the gas contents bounded by the RTI.
Article Text
References (28)
- I. Akhatov, O. Lindau, A. Topolnikov, R. Mettin, N. Vakhitova, and W. Lauterborn, Phys. Fluids 13, 2805 (2001).
- A. Buzukov and V. Teslensko, Sov. Phys. JETP Lett. 14, 189 (1971).
- W. Lauterborn, Acustica 31, 51 (1974).
- C. Ohl, T. Kurz, R. Geisler, O. Lindau, and W. Lauterborn, Philos. Trans. R. Soc. London A 357, 269 (1999).
- T. G. Leighton, The Acoustic Bubble (Academic Press, New York, 1994).
- F. R. Young, Cavitation (Imperial College Press, London, 1999).
- P. Weder, ME thesis, Instituto Balseiro, Universidad Nacional de Cuyo (2000).
- L. Rayleigh, Philos. Mag. 34, 94 (1917).
- G. F. Puente and F. J. Bonetto, Phys. Rev. E 71, 056309 (2005).
- K. Yasui, J. Phys. Soc. Jpn. 66, 2911 (1997).
- K. Yasui, Phys. Rev. E 63, 035301 (2001).
- G. F. Puente, R. Urteaga, and F. J. Bonetto, Phys. Rev. E 72, 046305 (2005).
- Y. Hao and A. Prosperetti, Phys. Fluids 11, 1309 (1999).
- C. E. Brennen, J. Fluid Mech 472, 153 (2002).
- O. Baghdassarian, B. Tabbert, and G. A. Williams, Phys. Rev. Lett. 83, 2437 (1999).
- O. Baghdassarian, H.-C. Chu, B. Tabbert, and G. A. Williams, Phys. Rev. Lett. 86, 4934 (2001).
- M. Barbaglia and F. J. Bonetto, J. Appl. Phys. 95, 1756 (2004).
- M. Barbaglia, P. Florido, R. Mayer, and F. J. Bonetto, Phys. Scr. 72, 75 (2005).
- B. Wolfrum, T. Kurz, O. Lindau, and W. Lauterborn, Phys. Rev. E 64, 046306 (2001).
- G. K. Batchelor, Introduction to Fluid Mechanics (Cambridge University Press, Cambridge, UK, 1967).
- R. Toegel, B. Gompf, R. Pecha, and D. Lohse, Phys. Rev. Lett. 85, 3165 (2000).
- D. J. Flannigan and K. S. Suslick, Nature (London) 434, 52 (2005).
- G. F. Puente, P. García-Martínez, and F. J. Bonetto, Phys. Rev. E 75, 016314 (2007).
- R. Urteaga, D. H. Dellavale, G. F. Puente, and F. J. Bonetto, Phys. Rev. E 76, 056317 (2007).
- B. Poling, G. Thomson, D. Fried, R. Rowley, and W. Wilding, Perry's Chemical Engineers’ Handbook, 8th ed. (McGraw Hill, New York, 2008).
- E. Washburn, International Critical Tables (Knovel, New York, 2003).
- D. R. Lide and W. M. Haynes, Handbook of Chemistry and Physics (CRC Press, Boca Raton, FL, 2009).
- S. M. Selby and R. C. Weast, Handbook of Chemistry and Physics (Chemical Rubber Company, Cleaveland, 1967).