- Access by Xinjiang University
Controlled manipulation of elastomers with radiation: Insights from multiquantum nuclear-magnetic-resonance data and mechanical measurements
Phys. Rev. E 83, 031802 – Published 17 March, 2011
DOI: https://doi.org/10.1103/PhysRevE.83.031802
Abstract
Filled and cross-linked elastomeric rubbers are versatile network materials with a multitude of applications ranging from artificial organs and biomedical devices to cushions, coatings, adhesives, interconnects, and seismic-isolation, thermal, and electrical barriers. External factors such as mechanical stress, temperature fluctuations, or radiation are known to create chemical changes in such materials that can directly affect the molecular weight distribution (MWD) of the polymer between cross-links and alter the structural and mechanical properties. From a materials science point of view it is highly desirable to understand, affect, and manipulate such property changes in a controlled manner. Unfortunately, that has not yet been possible due to the lack of experimental characterization of such networks under controlled environments. In this work we expose a known rubber material to controlled dosages of γ radiation and utilize a newly developed multiquantum nuclear-magnetic-resonance technique to characterize the MWD as a function of radiation. We show that such data along with mechanical stress-strain measurements are amenable to accurate analysis by simple network models and yield important insights into radiation-induced molecular-level processes.
Article Text
References (24)
- J. E. Mark, B. Erman, and F. R. Eirich, eds., Science and Technology of Rubber (Academic Press, New York, 2005).
- C. A. Harper, ed., Handbook of Plastics, Elastomers, & Composites (McGraw-Hill, New York, 2002).
- A. Ciesielski, An Introduction to Rubber Technology (Rupra Technology, Totton, Southampton, UK, 1999).
- A. S. Palsule, S. J. Clarson, and C. W. Widenhouse, J. Inorg Organomet. Polym. 18, 207 (2008).
- A. V. Tobolsky, Properties and Structure of Polymers (John Wiley, New York, 1960).
- J. G. Curro and E. A. Salazar, J. App. Polym. Sci. 19, 2571 (1975).
- J. A. Shaw, A. S. Jones, and A. S. Wineman, J. Mech. Phys. Solid 53, 2758 (2005).
- B. Erman and J. E. Mark, Structures and Properties of Rubberlike Networks (Oxford University Press, Oxford, 1999).
- L. R. G. Treloar, The Physics of Rubber Elasticity (Clarendon Press, Oxford, 1975).
- D. R. Rottach et al., Macromolecules 40, 131 (2007).
- H. S. Fricker, Proc. R. Soc. Lond. A 335, 269 (1973).
- Neo-Hookean is the simplest model and applicable for not-too-large strains. For larger strains one needs to use more sophisticated models. See, e.g., Ref. [9].
- Permanent set (), a commonly used term in this context, is related to through the equation .
- The permanent set measurements reported here were performed prior to any stress-strain cycling, and therefore do not include possible hysteresis effects.
- A. V. Tobolsky, I. V. Prettyman, and J. H. Dillon, J. App. Phys. 15, 380 (1944); R. D. Andrews, A. V. Tobolsky, and E. E. Hanson, ibid. 17, 352 (1946).
- R. S. Maxwell et al., Polym. Degrad. Stab. 94, 456 (2009).
- The branch in Fig. 4 (top) might indicate possible -dependence of at larger values of . However, to establish such trends with certainty more experiments are necessary. Here we ignore any such dependence.
- In this discussion we are neglecting the formation of rings through cross-linking of the same chain segment folded onto itself.
- K. Saalwächter, J. Am. Chem. Soc. 125, 14684 (2003).
- K. Saalwächter et al., J. Chem. Phys. 119, 3468 (2003).
- J. R. Giuliani et al., J. Phys. Chem. B 111, 12977 (2007).
- W. Kuhn and F. Grün, Kolloid-Z. 101, 248 (1942).
- T. H. Weisgraber et al., Polymer 50, 5613 (2009).
- LAMMPS: Large-scale Atomic/Molecular Massively Parallel Simulator; see [http://lammps.sandia.gov].