- Access by Xinjiang University
Oscillatory liquid-metal flow in a channel under rapidly decaying applied magnetic field
Phys. Rev. Fluids 11, 103703 – Published 21 October, 2026
DOI: https://doi.org/10.1103/jd2g-7rg5
Abstract
The channel flow of a liquid metal driven by a rapidly varying applied magnetic field is analyzed. The flow configuration, physical properties, and parameters correspond to a duct within a liquid-metal blanket of a nuclear fusion reactor under off-normal plasma conditions, such as plasma disruptions. The problem is solved numerically using a one-dimensional flow approximation. The longitudinal magnetic field, decaying at a typical rate on the order of 100 T/s, induces eddy currents that interact with a steady wall-normal magnetic field, generating the Lorentz force that drives the flow. Standing Alfvén waves are identified as the key mechanism controlling the liquid metal's response. These waves manifest as large-amplitude, gradually decaying oscillations of velocity, the induced magnetic field, and eddy currents. A parametric study predicts a severe response developing within the first few milliseconds of the event, with maximum flow velocities reaching several meters per second and Lorentz forces exceeding . Power-law approximations for the dependencies of the response characteristics on the flow parameters are developed. Finally, the effects of fluid compressibility and pressure waves are analyzed and found not to lead to a major modification of the flow evolution.
Physics Subject Headings (PhySH)
Article Text
References (24)
- S. Smolentsev, Perspectives of a DCLL blanket for a future strong magnetic field fusion device, Fusion Eng. Des. 200, 114158 (2024).
- S. Smolentsev, A. Vorobev, E. Yildirim, J. Naish, and A. Kumar, ST-E1 dual-cooled and self-cooled blanket concepts, Fusion Eng. Des. 230, 115880 (2026).
- C. Mistrangelo, L. Bühler, S. Smolentsev, V. Klüber, I. Maione, and J. Aubert, MHD flow in liquid metal blankets: Major design issues, MHD guidelines and numerical analysis, Fusion Eng. Des. 173, 112795 (2021).
- C. Mistrangelo, L. Bühler, C. Alberghi, S. Bassini, L. Candido, C. Courtessole, A. Tassone, F. R. Urgorri, and O. Zikanov, MHD R&D activities for liquid metal blankets, Energies 14, 6640 (2021).
- S. Smolentsev, Physical background, computations and practical issues of the magnetohydrodynamic pressure drop in a fusion liquid metal blanket, Fluids 6, 110 (2021).
- E. Hollmann, P. Aleynikov, T. Fülöp, D. Humphreys, V. Izzo, M. Lehnen, V. Lukash, G. Papp, G. Pautasso, F. Saint-Laurent, et al., Status of research toward the ITER disruption mitigation system, Phys. Plasmas 22, 021802 (2015).
- S. Smolentsev, M. Beidler, M. Delchini, A. Diaw, P. Ellis, E. Endeve, R. Falgout, Y. Fan, N. Ferraro, D. Gupta, H. Ahmad, C. Hauck, M. Hildebrand, P. Huang, Y. Jiang, A. Khodak, Z. Liu, J. Lore, R. Maingi, C. McNally, et al., Progress and status of the SciDAC-5 project on simulation of plasma-liquid metal interactions in plasma-facing components and breeding blankets, Fusion Eng. Des. 230, 115885 (2026).
- J. Blanchard and C. Martin, Thermal and electromagnetic transients in liquid metal surfaces of the FNSF, Fusion Sci. Technol. 75, 918 (2019).
- M. Lei, S. Xu, Q. Wu, M. Wang, and S. Liu, Study on the EM loads distribution of the updated WCCB blanket for CFETR during plasma major disruption, Prog. Nucl. Energy 144, 104109 (2022).
- S. C. Aduloju, Z. Fusinski, E. Hassan, S. Smolentsev, P. Humrickhouse, and L. Baylor, Determination of the structural stability of the vacuum vessel in a tokamak-based fusion reactor under transient loads, Fusion Eng. Des. 230, 115863 (2026).
- S. Smolentsev, A model and assessments of the effect of transient plasma on liquid metal flows in a fusion blanket, Fusion Eng. Des. 213, 114854 (2025).
- I. Smolyanov and O. Zikanov, Exploratory study of liquid-metal response to rapid variation of applied magnetic field, Phys. Rev. E 111, 065104 (2025).
- E. Endeve, D. Stefanski, M.-O. G. Delchini, S. Slattery, C. D. Hauck, B. Turcksin, and S. Smolentsev, A full-induction magnetohydrodynamics solver for liquid metal fusion blankets in Vertex-cfd, Fusion Eng. Des. 228, 115792 (2026).
- I. Smolyanov, Y. Listratov, E. Shmakov, D. Berdyugin, and I. Belyaev, Verification and comparison of numerical simulation codes for liquid metal flows with finite magnetic Reynolds number effects (unpublished).
- Y. Ueki, M. Hirabayashi, T. Kunugi, T. Yokomine, and K. Ara, Acoustic properties of Pb-17Li alloy for ultrasonic Doppler velocimetry, Fusion Sci. Technol. 56, 846 (2009).
- S. Blairs, Review of data for velocity of sound in pure liquid metals and metalloids, Int. Mater. Rev. 52, 321 (2007).
- O. Zikanov, I. Belyaev, Y. Listratov, P. Frick, N. Razuvanov, and V. Sviridov, Mixed convection in pipe and duct flows with strong magnetic fields, Appl. Mech. Rev. 73, 010801 (2021).
- P. A. Davidson, Introduction to Magnetohydrodynamics (Cambridge University Press, Cambridge, UK, 2016).
- The MathWorks Inc., Matlab version: R2024b, https://www.mathworks.com/products/new_products/release2024b.html (2024).
- R. D. Skeel and M. Berzins, A method for the spatial discretization of parabolic equations in one space variable, SIAM J. Sci. Stat. Comput. 11, 1 (1990).
- L. F. Shampine and M. W. Reichelt, The MATLAB ODE suite, SIAM J. Sci. Comput. 18, 1 (1997).
- D. Krasnov, O. Zikanov, and T. Boeck, Comparative study of finite difference approaches in simulation of magnetohydrodynamic turbulence at low magnetic Reynolds number, Comput. Fluids 50, 46 (2011).
- D. Krasnov, A. Akhtari, O. Zikanov, and J. Schumacher, Tensor-product-Thomas elliptic solver for liquid-metal magnetohydrodynamics, J. Comput. Phys. 474, 111784 (2023).
- https://www.energy.gov/doe-public-access-plan.
