Export citation

Export citation

Choose format for download:

Download Citation
  • Access by Xinjiang University

Nonuniformities in miscible two-layer two-component thin liquid films

Christopher Larsson and Satish Kumar*

  • Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, Minnesota 55455, USA

  • *kumar030@umn.edu

Phys. Rev. Fluids 6, 034004 – Published 26 March, 2021

DOI: https://doi.org/10.1103/PhysRevFluids.6.034004

Abstract

Depositing and obtaining a liquid film of uniform thickness is a problem integral to numerous applications and requires an understanding of capillary leveling, Marangoni flows, evaporation, and various other phenomena. These applications often demand multilayer films where each layer has distinct properties, and this gives rise to additional challenges. It has been experimentally demonstrated that two-layer films in which the layers are miscible can undergo dewetting, but theoretical understanding of this phenomenon is lacking. Through a lubrication-theory-based model, this work studies the mechanisms that may initiate dewetting in miscible two-layer two-component films. The model film consists of nonvolatile solvent and solute with constant density and viscosity. Two coupled fourth-order nonlinear partial differential equations describing the time evolution of the film height and solute concentration are derived and then solved with a pseudospectral method. It is found that a disparity in initial solute concentration between the film layers drives flows that lead to significant film-height nonuniformities. A parametric study is conducted to examine the influence of system parameters on this behavior and to develop several scaling relations that shed light on the underlying physical mechanisms.

Physics Subject Headings (PhySH)

Article Text

References (43)

  1. C. K. Buerkin, I. de Vries, S. M. Raupp, P. Scharfer, W. Schabel, and P. Groen, Investigation of interfacial instabilities with a two-layer slide coating process, J. Coat. Technol. Res. 14, 991 (2017).
  2. P. Kolliopoulos, K. S. Jochem, R. K. Lade, L. F. Francis, and S. Kumar, Capillary flow with evaporation in open rectangular microchannels, Langmuir 35, 8131 (2019).
  3. S. Karki, H. Kim, S. J. Na, D. Shin, K. Jo, and J. Lee, Thin films as an emerging platform for drug delivery, Asian J. Pharm. Sci. 11, 559 (2016).
  4. M. Dey, A. S. Vivek, H. N. Dixit, A. Richhariya, and J. J. Feng, A model of tear-film breakup with continuous mucin concentration and viscosity profiles, J. Fluid Mech. 858, 352 (2019).
  5. R. J. Braun, T. A. Driscoll, C. G. Begley, P. E. King-Smith, and J. I. Siddique, On tear film breakup (TBU): Dynamics and imaging, Math. Med. Biol. 35, 145 (2018).
  6. M. Schmitt, S. Raupp, D. Wagner, P. Scharfer, and W. Schabel, Analytical determination of process windows for bilayer slot die coating, J. Coat. Technol. Res. 12, 877 (2015).
  7. C. Girotto, B. P. Rand, J. Genoe, and P. Heremans, Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells, Sol. Energy Mater. Sol. Cells 93, 454 (2009).
  8. A. Oron, S. H. Davis, and S. G. Bankoff, Long-scale evolution of thin liquid films, Rev. Mod. Phys. 69, 931 (1997).
  9. R. V. Craster and O. K. Matar, Dynamics and stability of thin liquid films, Rev. Mod. Phys. 81, 1131 (2009).
  10. S. K. Serpetsi and S. G. Yiantsios, Stability characteristics of solutocapillary Marangoni motion in evaporating thin films, Phys. Fluids 24, 122104 (2012).
  11. J. R. A. Pearson, On convection cells induced by surface tension, J. Fluid Mech. 4, 489 (1958).
  12. L. E. Scriven and C. V. Sternling, On cellular convection driven by surface-tension gradients: Effects of mean surface tension and surface viscosity, J. Fluid Mech. 19, 321 (1964).
  13. C. V. Sternling and L. E. Scriven, Interfacial turbulence: Hydrodynamic instability and the Marangoni effect, AIChE J. 5, 514 (1959).
  14. S. G. Yiantsios, S. K. Serpetsi, F. Doumenc, and B. Guerrier, Surface deformation and film corrugation during drying of polymer solutions induced by Marangoni phenomena, Int. J. Heat Mass Transf. 89, 1083 (2015).
  15. T. Pham, X. Cheng, and S. Kumar, Drying of multicomponent thin films on substrates with topography, J. Polym. Sci., Part B: Polym. Phys. 55, 1681 (2017).
  16. M. Rodríguez-Hakim, J. M. Barakat, X. Shi, E. S. G. Shaqfeh, and G. G. Fuller, Evaporation-driven solutocapillary flow of thin liquid films over curved substrates, Phys. Rev. Fluids 4, 034002 (2019).
  17. O. E. Jensen and J. B. Grotberg, The spreading of heat or soluble surfactant along a thin liquid film, Phys. Fluids A 5, 58 (1993).
  18. J. P. Burelbach, S. G. Bankoff, and S. H. Davis, Nonlinear stability of evaporating/condensing liquid films, J. Fluid Mech. 195, 463 (1988).
  19. S. G. Yiantsios and B. G. Higgins, Marangoni flows during drying of colloidal films, Phys. Fluids 18, 082103 (2006).
  20. A. F. Routh and W. B. Zimmerman, Distribution of particles during solvent evaporation from films, Chem. Eng. Sci. 59, 2961 (2004).
  21. L. Merklein, M. Mink, D. Kourkoulos, B. Ulber, S. M. Raupp, K. Meerholz, P. Scharfer, and W. Schabel, Multilayer OLEDs with four slot die-coated layers, J. Coat. Technol. Res. 16, 1643 (2019).
  22. V. Derflinger, Multilayer hard coating for tools, U.S. Patent No. 7,618,720 (2009).
  23. J. C. Grunlan, Multilayer coating for flame retardant substrates, U.S. Patent No. 9,540,763 (2012).
  24. R. Belden, Multilayer coating with visual effect, International Patent Application No. 2017/066604 (2017).
  25. R. Horiuchi, W. J. Suszynski, and M. S. Carvalho, Simultaneous multilayer coating of water-based and alcohol-based solutions, J. Coat. Technol. Res. 12, 819 (2015).
  26. K. D. Danov, V. N. Paunov, N. Alleborn, H. Raszillier, and F. Durst, Stability of evaporating two-layered liquid film in the presence of surfactant - I. The equations of lubrication approximation, Chem. Eng. Sci. 53, 2809 (1998).
  27. K. D. Danov, V. N. Paunov, S. D. Stoyanov, N. Alleborn, H. Raszillier, and F. Durst, Stability of evaporating two-layered liquid film in the presence of surfactant - II. Linear analysis, Chem. Eng. Sci. 53, 2823 (1998).
  28. V. N. Paunov, K. D. Danov, N. Alleborn, H. Raszillier, and F. Durst, Stability of evaporating two-layered liquid film in the presence of surfactant - III. Non-linear stability analysis, Chem. Eng. Sci. 53, 2839 (1998).
  29. J. Nam and M. S. Carvalho, Linear stability analysis of two-layer rectilinear flow in slot coating, AIChE J. 56, 2503 (2010).
  30. A. Kalogirou, Instability of two-layer film flows due to the interacting effects of surfactants, inertia, and gravity, Phys. Fluids 30, 030707 (2018).
  31. S. Ghosh, R. Usha, and K. C. Sahu, Linear stability analysis of miscible two-fluid flow in a channel with velocity slip at the walls, Phys. Fluids 26, 014107 (1994).
  32. B. Tsai, M. S. Carvalho, and S. Kumar, Leveling of thin films of colloidal suspensions, J. Colloid Interface Sci. 343, 306 (2010).
  33. R. V. Craster and O. K. Matar, Numerical simulations of fingering instabilities in surfactant-driven thin films, Phys. Fluids 18, 032103 (2006).
  34. B. D. Edmonstone, O. K. Matar, and R. V. Craster, A note on the coating of an inclined plane in the presence of soluble surfactant, J. Colloid Interface Sci. 293, 222 (2006).
  35. G. Vazquez, E. Alvarez, and J. M. Navaza, Surface tension of alcohol + water from 20 to 50 C, J. Chem. Eng. Data 40, 611 (1995).
  36. J. P. Boyd, Chebyshev and Fourier Spectral Methods: Second Revised Edition (Dover Publications, Mineola, NY, 2001).
  37. L. N. Trefethen, Spectral methods in matlab (Society for Industrial and Applied Mathematics (SIAM), Philadelphia, PA, 2000).
  38. D. Kosloff and H. Tal-Ezer, A modified Chebyshev pseudospectral method with an O(N1) time step restriction, J. Comput. Phys. 104, 457 (1993).
  39. J. L. Mead and R. A. Renaut, Optimal Runge-Kutta methods for first order pseudospectral operators, J. Comput. Phys. 152, 404 (1999).
  40. M. Mistry and R. Misener, Optimising heat exchanger network synthesis using convexity properties of the logarithmic mean temperature difference, Comput. Chem. Eng. 94, 1 (2016).
  41. M. Schulz and J. L. Keddie, A critical and quantitative review of the stratification of particles during the drying of colloidal films, Soft Matter 14, 6181 (2018).
  42. J. Nam and M. S. Carvalho, Mid-gap invasion in two-layer slot coating, J. Fluid Mech. 631, 397 (2009).
  43. M. Dizechi and E. Marschall, Viscosity of some binary and ternary liquid mixtures, J. Chem. Eng. Data 27, 358 (1982).

Outline

Information

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation