- Physical Review Journals
All JournalsPhysics Magazine
Access Provided by Xinjiang University

Physical Review Applied

Export citation

Export citation

Choose format for download:

Download Citation
  • Editors' Suggestion
  • Access by Xinjiang University

Relating Charge Transport, Contact Properties, and Recombination to Open-Circuit Voltage in Sandwich-Type Thin-Film Solar Cells

Oskar J. Sandberg*, Anton Sundqvist, Mathias Nyman, and Ronald Österbacka

  • Department of Natural Sciences, Center for Functional Materials, Åbo Akademi University, Porthaninkatu 3, 20500 Turku, Finland

  • *osandber@abo.fi
PDF

Phys. Rev. Applied 5, 044005 – Published 12 April, 2016

DOI: https://doi.org/10.1103/PhysRevApplied.5.044005

Abstract

To avoid surface recombination at the contacts and ensure efficient charge collection and high open-circuit voltages (VOC) in organic bulk heterojunction and perovskite solar cells, selective contacts with optimized energy levels are needed. However, a detailed theoretical understanding of how the device performance is affected by surface recombination at the contacts is still lacking. In this work, the influence of surface recombination on the open-circuit voltage in sandwich-type solar cells, with optically thin active layers, is clarified using numerical simulations. Furthermore, analytical expressions are derived, directly relating VOC to relevant device parameters, such as surface recombination velocity (Sp), mobility, and active layer thickness. At large Sp, the surface recombination is determined by diffusion-limited transport in the bulk. By reducing Sp, thus increasing the charge selectivity of the electrode, the surface recombination is eventually reduced as the transport becomes limited by interface kinetics at the contact. Depending on the interplay between surface recombination and bulk recombination, and the properties of the contacts, different operating regimes are identified featuring different light ideality factors and thickness dependences.

View figure in article

Physics Subject Headings (PhySH)

Article Text

References (59)

  1. C. Deibel and V. Dyakonov, Polymer-fullerene bulk heterojunction solar cells, Rep. Prog. Phys. 73, 096401 (2010).
  2. L. Dou, J. You, Z. Hong, Z. Xu, G. Li, R. A. Street, and Y. Yang, 25th anniversary article: A decade of organic/polymeric photovoltaic research, Adv. Mater. 25, 6642 (2013).
  3. N.-G. Park, Perovskite solar cells: An emerging photovoltaic technology, Mater. Today 18, 65 (2015).
  4. Mohammad Khaja Nazeeruddin, and Henry Snaith, Methylammonium lead triiodide perovskite solar cells: A new paradigm in photovoltaics, MRS Bull. 40, 641 (2015).
  5. T. Kirchartz, J. Bisquert, I. Mora-Sero, and G. Garcia-Belmonte, Classification of solar cells according to mechanisms of charge separation and charge collection, Phys. Chem. Chem. Phys. 17, 4007 (2015).
  6. L. J. A. Koster, V. D. Mihailetchi, R. Ramaker, and P. W. M. Blom, Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells, Appl. Phys. Lett. 86, 123509 (2005).
  7. T. Kirchartz, J. Mattheis, and U. Rau, Detailed balance theory of excitonic and bulk heterojunction solar cells, Phys. Rev. B 78, 235320 (2008).
  8. K. Vandewal, K. Tvingstedt, A. Gadisa, O. Inganäs, and J. V. Manca, On the origin of the open-circuit voltage of polymer-fullerene solar cells, Nat. Mater. 8, 904 (2009).
  9. J. C. Blakesley and D. Neher, Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells, Phys. Rev. B 84, 075210 (2011).
  10. W. Tress, K. Leo, and M. Riede, Optimum mobility, contact properties, and open-circuit voltage of organic solar cells: A drift-diffusion simulation study, Phys. Rev. B 85, 155201 (2012).
  11. K. R. Graham, P. Erwin, D. Nordlund, K. Vandewal, R. Li, G. O. Ngongang Ndjawa, E. T. Hoke, A. Salleo, M. E. Thompson, M. D. McGehee, and A. Amassian, Re-evaluating the role of sterics and electronic coupling in determining the open-circuit voltage of organic solar cells, Adv. Mater. 25, 6076 (2013).
  12. Q. Bao, O. Sandberg, D. Dagnelund, S. Sanden, S. Braun, H. Aarnio, X. Liu, W. Chen, R. Osterbacka, and M. Fahlman, Trap-assisted recombination via integer charge transfer states in organic bulk heterojunction photovoltaics, Adv. Funct. Mater. 24, 6309 (2014).
  13. W. Yang, Y. Yao, and C.-Q. Wu, Origin of the high open circuit voltage in planar heterojunction perovskite solar cells: Role of the reduced bimolecular recombination, J. Appl. Phys. 117, 095502 (2015).
  14. J. Yao, T. Kirchartz, M. S. Vezie, M. A. Faist, W. Gong, Z. He, H. Wu, J. Troughton, T. Watson, D. Bryant, and J. Nelson, Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells, Phys. Rev. Applied 4, 014020 (2015).
  15. N. K. Elumalai and Ashraf Uddin, Open circuit voltage of organic solar cells: An in-depth review, Energy Environ. Sci. 9, 391 (2016).
  16. T. Kirchartz, B. E. Pieters, K. Taretto, and U. Rau, Mobility dependent efficiencies of organic bulk heterojunction solar cells: Surface recombination and charge transfer state distribution, Phys. Rev. B 80, 035334 (2009).
  17. T. Kirchartz, F. Deledalle, P. Shakya Tuladhar, J. R. Durrant, and J. Nelson, On the differences between dark and light ideality factor in polymer:fullerene solar cells, Phys. Chem. Lett. 4, 2371 (2013).
  18. T. Kirchartz, B. E. Pieters, J. Kirkpatrick, U. Rau, and J. Nelson, Recombination via tail states in polythiophene:fullerene solar cells, Phys. Rev. B 83, 115209 (2011).
  19. T. Kirchartz and J. Nelson, Meaning of reaction orders in polymer:fullerene solar cells, Phys. Rev. B 86, 165201 (2012).
  20. M. Nyman, O. J. Sandberg, and R. Österbacka, 2D and trap-assisted 2D Langevin recombination in polymer:fullerene blends, Adv. Energy Mater. 5, 1400890 (2015).
  21. P. Würfel, Physics of Solar Cells, 2nd ed. (Wiley-VCH, Weinheim, Germany, 2009).
  22. G. A. H. Wetzelaer, M. Kuik, M. Lenes, and P. W. M. Blom, Origin of the dark-current ideality factor in polymer:fullerene bulk heterojunction solar cells, Appl. Phys. Lett. 99, 153506 (2011).
  23. W. Tress, K. Leo, and M. Riede, Dominating recombination mechanisms in organic solar cells based on ZnPc and C60, Appl. Phys. Lett. 102, 163901 (2013).
  24. C. J. Brabec, A. Cravino, D. Meissner, N. S. Sariciftci, T. Fromherz, M. T. Rispens, L. Sanchez, and J. C. Hummelen, Origin of the open circuit voltage of plastic solar cells, Adv. Funct. Mater. 11, 374 (2001).
  25. E. J. Juarez-Perez, M. Wussler, F. Fabregat-Santiago, K. Lakus-Wollny, E. Mankel, T. Mayer, W. Jaegermann, and I. Mora-Sero, Role of the selective contacts in the performance of lead halide perovskite solar cells, J. Phys. Chem. Lett. 5, 680 (2014).
  26. V. D. Mihailetchi, P. W. M. Blom, J. C. Hummelen, and M. T. Rispens, Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells, J. Appl. Phys. 94, 6849 (2003).
  27. O. J. Sandberg, M. Nyman, and R. Österbacka, Effect of Contacts in Organic Bulk Heterojunction Solar Cells, Phys. Rev. Applied 1, 024003 (2014).
  28. D. Rauh, A. Wagenpfahl, C. Deibel, and V. Dyakonov, Relation of open circuit voltage to charge carrier density in organic bulk heterojunction solar cells, Appl. Phys. Lett. 98, 133301 (2011).
  29. R. Sokel and R. C. Hughes, Numerical analysis of transient photoconductivity in insulators, J. Appl. Phys. 53, 7414 (1982).
  30. Y. Zhou, J. W. Shim, C. F. Hernanderz, A. Sharma, K. A. Knauer, A. J. Giordano, S. R. Marder, and B. Kippelen, Direct correlation between work function of indium-tin-oxide electrodes and solar cell performance influenced by ultraviolet irradiation and air exposure, Phys. Chem. Chem. Phys. 14, 12014 (2012).
  31. J. Reinhardt, M. Grein, C. Bühler, M. Schubert, and U. Würfel, Identifying the impact of surface recombination at electrodes in organic solar cells by means of electroluminescence and modeling, Adv. Energy Mater. 4, 1400081 (2014).
  32. A. Zampetti, A. H. Fallahpour, M. Dianetti, L. Salamandra, F. Santoni, A. Gagliardi, M. Auf der Maur, F. Brunetti, A. Reale, T. M. Brown, and A. Di Carlo, Influence of the interface material layers and semiconductor energetic disorder on the open circuit voltage in polymer solar cells, J. Polym. Sci. B 53, 690 (2015).
  33. S. Wheeler, F. Deledalle, N. Tokmoldin, T. Kirchartz, J. Nelson, and J. R. Durrant, Influence of Surface Recombination on Charge-Carrier Kinetics in Organic Bulk Heterojunction Solar Cells with Nickel Oxide Interlayers, Phys. Rev. Applied 4, 024020 (2015).
  34. A. Wagenpfahl, C. Deibel, and V. Dyakonov, Organic solar cell efficiencies under the aspect of reduced surface recombination velocities, IEEE J. Sel. Top. Quantum Electron. 16, 1759 (2010).
  35. E. Ahlswede, J. Hanisch, and M. Powalla, Comparative study of the influence of LiF, NaF, and KF on the performance of polymer bulk heterojunction solar cells, Appl. Phys. Lett. 90, 163504 (2007).
  36. Z. C. He, C. M. Zhong, X. Huang, W. Y. Wong, H. B. Wu, L. W. Chen, S. J. Su, and Y. Cao, Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells, Adv. Mater. 23, 4636 (2011).
  37. E. L. Ratcliff, A. Garcia, S. A. Paniagua, S. R. Cowan, A. J. Giordano, D. S. Ginley, S. R. Marder, J. J. Berry, and D. C. Olson, Investigating the influence of interfacial contact properties on open circuit voltages in organic photovoltaic performance: Work function versus selectivity, Adv. Energy Mater. 3, 647 (2013).
  38. H. Wang, E. D. Gomez, Z. Guan, C. Jaye, M. F. Toney, D. A. Fischer, A. Kahn, and Y.-L. Loo, Tuning contact recombination and open-circuit voltage in polymer solar cells via self-assembled monolayer adsorption at the organic-metal oxide interface, J. Phys. Chem. C 117, 20474 (2013).
  39. S. M. Sze, Physics of Semiconductor Devices (Wiley & Sons, New York, 1981).
  40. G. A. H. Wetzelaer, L. J. A. Koster, and P. W. M. Blom, Validity of the Einstein Relation in Disordered Organic Semiconductors, Phys. Rev. Lett. 107, 066605 (2011).
  41. J. C. Blakesley and N. C. Greenham, Charge transfer at polymer-electrode interfaces: The effect of energetic disorder and thermal injection on band bending and open-circuit voltage, J. Appl. Phys. 106, 034507 (2009).
  42. M. Kuik, L. J. A. Koster, G. A. H. Wetzelaer, and P. W. M. Blom, Trap-Assisted Recombination in Disordered Organic Semiconductors, Phys. Rev. Lett. 107, 256805 (2011).
  43. A. Pivrikas, G. Juśka, A. J. Mozer, M. Scharber, K. Arlauskas, N. S. Sariciftci, H. Stubb, and R. Österbacka, Bimolecular Recombination Coefficient as a Sensitive Testing Parameter for Low-Mobility Solar-Cell Materials, Phys. Rev. Lett. 94, 176806 (2005).
  44. C. Groves and N. C. Greenham, Bimolecular recombination in polymer electronic devices, Phys. Rev. B 78, 155205 (2008).
  45. M. C. Heiber, C. Baumbach, V. Dyakonov, and C. Deibel, Encounter-Limited Charge-Carrier Recombination in Phase-Separated Organic Semiconductor Blends, Phys. Rev. Lett. 114, 136602 (2015).
  46. D. H. K. Murthy, A. Melianas, Z. Tang, G. Juska, K. Arlauskas, F. Zhang, L. D. A. Siebbeles, O. Inganäs, and T. J. Savenije, Origin of reduced bimolecular recombination in blends of conjugated polymers and fullerenes, Adv. Funct. Mater. 23, 4262 (2013).
  47. G. A. H. Wetzelaer, N. J. Van der Kaap, L. J. A. Koster, and P. W. M. Blom, Quantifying bimolecular recombination in organic solar cells in steady state, Adv. Energy Mater. 3, 1130 (2013).
  48. C. Wehrenfennig, G. E. Eperon, M. B. Johnston, H. J. Snaith, and L. M. Herz, High charge carrier mobilities and lifetimes in organolead trihalide perovskites, Adv. Mater. 26, 1584 (2014).
  49. J. C. Scott and G. C. Malliaras, Charge injection and recombination at the metal-organic interface, Chem. Phys. Lett. 299, 115 (1999).
  50. P. de Bruyn, A. H. P. van Rest, G. A. H. Wetzelaer, D. M. de Leeuw, and P. W. M. Blom, Diffusion-Limited Current in Organic Metal-Insulator-Metal Diodes, Phys. Rev. Lett. 111, 186801 (2013).
  51. P. Nelson, Biological Physics: Energy, Information, Life (W. H. Freeman Co. Ltd, New York, 2004), pp. 260–272, 283–289.

  52. For Ohmic contacts we require Lcat≪d and α=nph/ncat≪1; Eq. (12) reduces to vd,p=(μpkT/q)Bp−1 with Bp=α2∫0d[(2x/d)−1]coth2{[1+([d−x]/Lcat)]α}dx≈Lcat, where coth(u)≈1/u (for u≪1) and coth(u)→1 (for u≫1) have been utilized.

  53. S. Schäfer, A. Petersen, T. A. Wagner, R. Kniprath, D. Lingenfelser, A. Zen, T. Kirchartz, B. Zimmermann, U. Wurfel, X. Feng, and T. Mayer, Influence of the indium tin oxide/organic interface on open-circuit voltage, recombination, and cell degradation in organic small-molecule solar cells, Phys. Rev. B 83, 165311 (2011).
  54. M. Lu, P. de Bruyn, H. T. Nicolai, G.-J. A. Wetzelaer, and P. W. Blom, Hole-enhanced electron injection from ZnO in inverted polymer light-emitting diodes, Org. Electron. 13, 1693 (2012).
  55. A. Sundqvist, O. J. Sandberg, M. Nyman, J-H. Smått, and R. Österbacka, Origin of the S-shaped JV curve and the light-soaking issue in inverted organic solar cells, Adv. Energy Mater. 6, 1502265 (2016).

  56. Now, with Jp(x) given by Eq. (a6), Eq. (12) reveals vd,p=μpF[(kT/qFLn*)(eqFLn*/kT−1)−1]−1≈[(2μpkT/Ln*)−(2μpF/3)], where −qFLn*≪kT was assumed in the last step. Then, from Eq. (11), with Jp(d)=qGLLn*, Eq. (20) follows.

  57. Equating Eqs. (7a) and (11) at V=VOC yields p(d)={pcat/[1+(Sp/vd,p)]}(eqVOC/kT−1)+pcat≈pcateqVOC/kT, for Sp≪vd,p, while p(d)→pcat when Sp→∞.

  58. For R=βR(p)p2∝pα, βR(p) is also dependent on GL; in this case the ratio (GL/βR) becomes equal to (GL/γ)mR in Eq. (10), where γ is a coefficient independent of GL.

  59. V. Gupta, A. K. K. Kyaw, D. H. Wang, S. Chand, G. C. Bazan, and A. J. Heeger, Barium: An efficient cathode layer for bulk-heterojunction solar cells, Sci. Rep. 3, 1965 (2013).

Outline

Information

Phys. Rev. Applied 5, 044005– Published 12 April, 2016
  • Received 11 February 2016

© 2016 American Physical Society

Sign In to Your Journals Account

Filter

Filter

Article Lookup

Enter a citation