- Open Access
Breakdown and field emission conditioning of Cu, Mo, and W
Phys. Rev. ST Accel. Beams 7, 092003 – Published 14 September, 2004
DOI: https://doi.org/10.1103/PhysRevSTAB.7.092003
Abstract
The ultrahigh-vacuum electrical breakdown characteristics of copper, molybdenum, and tungsten have been explored in a setup based on a capacitor discharge. Upon repeated sparking, tungsten and molybdenum showed improvement of the maximum applicable field before breakdown (conditioning) in contrast to copper, which experienced alternate improvement and degrading. After conditioning, tungsten withstood the highest applied field followed by molybdenum and copper. This behavior was correlated with that of the field enhancement factor extracted from measurements of the field emission current. These results are compared with the tests performed on 30 GHz test accelerating structures for the future Compact Linear Collider.
Article Text
References (21)
- A 3 TeV Collider Based on CLIC Technology, CERN Report No. CERN-2000-008,2000; J. P.Delahaye et al., in Proceedings of the 1999 Particle Accelerator Conference, New York, 1999 (IEEE, Piscataway, NJ, 1999), Vol. 1, p. 250.
- Proceedings of the Workshop High Gradient RF at Argonne National Laboratory, Argonne, IL, 2003, http://www.mice.iit.edu/rfworkshop/.
- P. A. Chatterton, in Electrical Breakdown in Gases, edited by J. M. Meek and J. D. Craggs (Wiley, London, 1978).
- High Voltage Vacuum Insulation, edited by R. V. Latham (Academic, New York, 1995).
- H. Padamsee, J. Knobloch, and T. Hays, RF Superconductivity for Accelerators (Wiley, New York, 1998).
- H. H. Braun, CERN Report No. CERN-PS-2001-008, 2001; in Proceedings of the 18th International Conference on High Energy Accelerators (HEACC2001), Tsukuba, Japan, http://conference.kek.jp/heacc2001.
- C. Adolphsen, W. Baumgartner, R. K. Jobe, F. Le Pimpec, R. Loewen, D. McCormick, M. C. Ross, T. Smith, J. W. Wang, and T. Higo, in Proceedings of the Particle Accelerator Conference, Chicago, IL, 2001 (IEEE, Piscataway, NJ, 2001), Vol. 1, p. 478.
- W. Wuensch, CERN CLIC Note 516, 2002; in Proceedings of the 8th European Particle Accelerator Conference, Paris, 2002 (EPS-IGA, Geneva, 2002), p. 134.
- H. H. Braun, S. Döbert, I. Wilson, and W. Wuensch, Phys. Rev. Lett. 90, 224801 (2003).
- C. Benvenuti (private communication)
- C. Achard, H. Braun, S. Döbert, I. Syratchev, M. Taborelli, I. Wilson, and W. Wuensch, CERN CLIC Note 569, 2003; in Proceedings of the 2003 Particle Accelerator Conference, Portland, OR, 2003, http://accelconf.web.cern.ch/accelconf, p. 495.
- M. Kildemo, Nucl. Instrum. Methods Phys. Res., Sect. A (to be published).
- N. Hilleret , C. Scheuerlein, and M. Taborelli, Appl. Phys. A 76, 1085 (2003).
- E. I. Murphy and R. H. Good, Jr., Phys. Rev. 102, 1464 (1956).
- J. P. Barbour, W. W. Dolan, J. K. Trolan, E. E. Martin, and W. P. Dyke, Phys. Rev. 92, 45 (1953).
- J. Holzl, F. K. Schulte, and H. Wagner, in Solid Surface Physics (Springer, New York, 1979).
- C. Benndorf, B. Egert, G. Keller, H. Seidel, and F. Thieme, J. Phys. Chem. Solids 40, 877 (1979).
- B. M. Cox, J. Phys. D 7, 143 (1974).
- D. Burke (unpublished).
- A. R.Miedema, Z. Metallkd. 69, 287 (1978).
- S. H.Overbury, P. A.Bertrand, and G. A.Somorjai, Chem. Rev. (Washington, D.C.) 75, 547 (1975).