- Access by Xinjiang University
A Comparison of X-Ray Line Breadth and Internal Friction for Alpha-Brass as Affected by Cold-Working and Annealing
Phys. Rev. 62, 330 – Published 1 October, 1942
DOI: https://doi.org/10.1103/PhysRev.62.330
Abstract
X-ray line breadth measurements are obtained for samples of alpha-brass cold-stretched in differing amounts and then annealed at various temperatures. A comparison of these data with internal friction measurements made on the same samples reveals marked dissimilarities. For small amounts of cold-work, line breadths appear to be affected by the rate of cold-working, whereas internal friction seems more dependent upon the amount of cold-work. The internal friction introduced by cold-work is removed by low temperature annealing (far below the temperature of recrystallization). Line breadth changes little with annealing until just before recrystallization when it exhibits a comparatively sharp decrease.
References (17)
- John T. Norton, Trans. A. I. M. E. 137, 49 (1940)
- C. Zener, H. Clarke, and C. S. Smith, Metals Tech. (Oct. 1941) (A. I. M. E. Tech. Pub. No. 1376)
- G. W. Brindley, Proc. Phys. Soc. 52, 117 (1940)
- J. E. Wilson and L. Thomassen, Trans. A. S. M. E. 22, 769 (1934)
- K. Becker, Zeits. f. Physik 42, 226 (1927)
- F. E. Haworth, Phys. Rev. 52, 613 (1937)
- W. A. Wood, Proc. Roy. Soc. A172, 231 (1939)
- E. Orowan and K. J. Roscoe, Nature 148, 467 (1941)
- W. A. Wood, Nature 131, 842 (1933)
- W. A. Wood, Phil. Mag. 19, 219 (1935)
- V. Caglioti and G. Sachs, Zeits. f. Physik 74, 647 (1932)
- U. Dehlinger, Zeits. f. Krist. 65, 615 (1927)
- G. W. Brindley and P. Ridley, Proc. Phys. Soc. 50, 501 (1939)
Omitted endnote
- C. Zener, Phys. Rev. 60, 455 (1941)
- R. H. Randall, F. C. Rose, and C. Zener, Phys. Rev. 56, 343 (1939)
- C. Zener and R. H. Randall, Trans. A. I. M. E. 137, 41 (1940)